Parrot DS1120 User Guide

8. Troubleshooting
Probl
e
ms
Solutions
No sound is coming through the
Parrot DS1120.
- Check that your device supports the Bluetooth A2DP profile
and the source role.
- If your audio player is a PC, Check that the «Sound
playback» option is set to «Highquality Bluetooth Audio». You
can find this option by selecting Start/Settings/Control
panel/Sound and Audio Devices/ Audio on your computer.
- Check the volume of the speakers
I cannot connect my audio player
to the Parrot DS1120.
- Hold down the Configuration button on the Parrot DS1120
for two seconds, then restart the search and connect.
I used a Jack audio cable to
connect my audio player, but I get
no sound.
- Check that the jack audio cable is properly plugged in to
the Parrot DS1120 and audio player.
- Check that there is no Bluetooth connection with an audio
player. The Bluetooth connection will take priority over the
Jack connection.
- Check the volume of the speakers.
My Parrot DS1120 makes a noise
when I use a jack audio cable.
- Check that the jack audio cable is properly plugged in to
the Parrot DS1120 and audio player.
When I watch a video, the sound
from the Parrot DS1120 is not
synchronized with the image.
- Use the Parrot Audio Configuration Tool to check that your
system’s audio delay is correctly configured for this type of
use.

Parrot DS1120 Specifications

Speakers

output power	2 x 15 W (RMS)
frequency range	100Hz – 18 kHz
dimensions	153 x 144 x 131 mm
weight	2 x 950g

Memory

flash memory	4MB
ram	8MB

Power Supply

ac voltage	100-240V ~ 50/60Hz
dc voltage	12V
dc current	2A