• Streaming Audio from a PC (A2DP profile). Refer to the “Using the Parrot Bluetooth USB
Dongle” section for more information.
• Streaming audio from any kind of audio player with the Jack socket (Jack-Jack audio cable
supplied)
• Streaming Audio from a mobile phone / PDA / Smartphone (A2DP profile)
NOTE: IF YOU WANT TO FIND OUT WHICH DEVICES ARE EQUIPPED WITH THE A2DP TECHNOLOGY, VISIT
THE SUPPORT SECTIONON OUR WEBSITE AT WWW.PARROT.COM
Setting up the Parrot DS1120
The Parrot DS1120 is designed to be placed on a desk, a table or a stable shelf. To get the best
possible sound performances, we advise you to respect the following recommendations:
• Make sure that you correctly installed the speakers at their respective positions (the “Right”
and “Left” labels are located on the back of the speakers).
• Install your speakers at the same distance from the listening point.
• Make sure there are no obstacles between the speakers and you. Avoid corners if possible.
• Turn the speakers towards the listening point by establishing a 60 degree angle (refer to the
diagram) as most of the stereo recordings are realized for this configuration.
• Install your speakers at ear level: by doing so, the frequency response will be optimal.
• To get the best possible reproduction of the bass frequencies, make sure there is a minimal
distance of 40 cm between the back and lateral walls and the speaker. Bass frequencies will
get louder if you place your speakers closer to the walls.
To Next Page
Loading...
Need help?
Speakers
Memory
