11
3. Secure the clamp bracket to the transom using the appropriate bolts. For details, consult your dealer.
WARNING：
Avoid using bolts, nuts or washers inappropriate. After tightening, test running the engine and
check their tightness.
2.2 Breaking in engine
Your new engine requires a period of breaking to allow mating surfaces of moving parts to wear in evenly.
CAUTION
Failure to follow the break-in procedure could result in reduced engine life or even severe engine
Damage.
1. for the first hour of operation:
Run the engine at 2000 r/min or at approximately half throttle.
2. for the second hour of operation:
Run the engine at3000 r/min or at approximately three-quarter throttle.
3. for the next eight hours of operation:
Avoid continuous operation at full throttle for more than five minutes at a time.
4. Operate the engine normally.
https://www.boat-manuals.com/
To Next Page
Loading...
Need help?
General
