Need help?Do you have a question about the Parsun F4BM and is the answer not in the manual?
General| Engine Type | 4-Stroke |
|---|---|
| Power | 4 HP |
| Fuel Tank Capacity | 1.1 L |
| Weight | 27 kg |
| Starting System | Manual |
| Gear Ratio | 2.08:1 |
| Cylinder | 1 |
| Full Throttle Operating Range | 5000-6000 RPM |
| Max RPM | 6000 RPM |
| Gear Shift | F-N-R |
| Shaft Length | 381 mm (15 in) |
Outboard motor serial number location and format.
Guidance on choosing the correct propeller for optimal performance.
Procedure for starting the engine using an emergency start cable.
Precautions for safe maintenance and repair operations.
Principles for efficient and safe maintenance, including torque and tool usage.
Essential checks to perform before delivering the outboard engine.
Lists and illustrates tools and diagnostic equipment for maintenance.
Detailed technical specifications for the outboard engine.
Specifications and limits for engine components during maintenance.
Specified torque values for various engine assembly points.
Schedule for initial and general maintenance tasks based on operating hours.
Procedures for inspecting and maintaining the fuel system components.
Procedures for engine oil, valve clearance, and spark plug maintenance.
Checks and adjustments for throttle, idling speed, and start-in-gear protection.
Procedures for recoil starter disassembly, inspection, and replacement.
Procedures for inspecting ignition system components like coil and wiring.
Procedures for removing and inspecting the intake system.
Procedures for gear oil, leakage checks, and water pump maintenance.
Procedures for cylinder cover, valves, and related components.
Procedures for crankcase, piston, rings, crankshaft, and assembly.
Procedures for top cowling, bottom cowling, steering handle, and bracket.
Troubleshooting guide for common engine issues and solutions.
To Next Page
