SPECIAL TOOLS
Piston slider Bearing puller Valve spring compressor
Housing bearing installer Oil seal installer tool Housing oil seal installer
Space gauge
DISASSEMBLING POWER UNIT FROM OUTBOARD ENGINE
1. Open the top cowling.
2. Remove the starter and fuel pump.
3. Remove choke cable and throttle cable.
4. Remove air filter and carburetor.
5. Remove bolts connecting the engine and upper casing.
6. Carry the power unit and put it onto the working table.
DISASSEMBLING AND INSPECTION
49
https://www.boat-manuals.com/
To Next Page
Loading...
Need help?
General
