Parsun F15BM User Manual

34
3.Disconnect the fuel line.
2.10 Trimming outboard motor
There are 4 or 5 holes provided in the clamp bracket to adjust the outboard motor trim angle.
1. Stop the engine.
2. Remove the trim rod from the clamp bracket while slightly tilting the outboard motor up.
3. Reposition the rod in the desired hole. Make test runs with the trim set to different angles to find
the position that works best for your boat and operating conditions.

Parsun F15BM Specifications

General

Brand	Parsun
Model	F15BM
Category	Outboard Motor
Language	English