EasyManuals Logo

Parsun F15BM User Manual

Parsun F15BM
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
45
2. Unscrew the filter cup, catching any spilled fuel in a rag.
3. Remove the filter element, and wash it in solvent.
Allow it to dry. Inspect the filter element and O-ring
of the filter cup to make sure they are in good condition.
Change them if necessary. If any water is found in
the fuel, check and clean the portable fuel tank.
1. filter cup 2. O-ring 3.filter element 4. filter housing
4. Reinstall the filter element in the cup. Make sure the O-ring is in position in the cup. Firmly screw the
cup onto the filter housing.
5. Attach the filter assembly to the bracket so that the fuel hoses are attached to the filter assembly.
Run the engine and check the filter and lines for leaks.
3.4 Inspecting idling speed
A diagnostic tachometer should be used for this procedure. Results may vary depending on whether
testing is conducted with the flushing attachment, in a test tank, or with the outboard motor in the water.
1. Start the engine and allow it to warm up fully in neutral until it is running smoothly.
2. Verify whether the idle speed is set to specification. Idle speed950±50Rpm
1
2
3
4

Other manuals for Parsun F15BM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Parsun F15BM and is the answer not in the manual?

Parsun F15BM Specifications

General IconGeneral
BrandParsun
ModelF15BM
CategoryOutboard Motor
LanguageEnglish

Related product manuals