22
4. Throttle friction adjuster
The throttle friction adjuster is on the tiller handle, which provides adjustable resistance to movement of the
throttle grip, and can be set according to operator preference. To increase resistance, turn the adjuster
clockwise. To decrease resistance, turn the adjuster counterclockwise. When constant speed is desired,
tighten the adjuster to maintain the desired throttle setting.
WARNING：
Do not over-tighten the friction adjuster. If there is too much resistance, it could be difficult to move
throttle lever or grip, which could result in an accident.
https://www.boat-manuals.com/
To Next Page
Loading...
Need help?
General
