37
3. Put a new gasket on the oil drain screw. Tighten the drain screw.
4. Add the correct amount of oil through the filler hole. Install the filler cap.
5. Start the engine and make sure that there are no oil leaks.
6. Turn off the engine and wait 3 minutes. Recheck the oil level using the dipstick to be sure the level falls
between the upper and lower marks.
CAUTION:
The oil should be changed more often when the engine is operated under adverse conditions such
as extended trolling.
https://www.boat-manuals.com/
To Next Page
Loading...
Need help?
General
