parts.
The procedure is as follows:
1. Remove the top cowling.
2. Remove the start-in-gear protection device cable, and remove the chock lever cable.
1.Start-in-gear protection device cable 2. Chock lever cable
3. Demount three bolts and remove starter.
4. Assemble two bolts to fix the fuel tank.
5. Insert the knot of the cable in the notch of flywheel rotor, and wind the cable around flywheel
several rounds in clockwise direction.
6. Pull the manual starter handle slowly until you feel resistance.
2
https://www.boat-manuals.com/
To Next Page
Loading...
