4. Tr toring
The outboard motor should be tr ng position. If there is insufficient
ansporting and s
4.1 Transporting
ailed an rud stored in the normal nni
ard motor in the tilt positioroad clearance in this position, then trailer the outbo n using a motor support
device.
CAUTION:
Do not use the tilt support lever or knob when trailing the boat.
all.
The outboard motor could shake loose from the tilt support and f
WARNING:
z er the lower unit while it is tilted, even if a motor support bar is used.
z When transporting or storing the outboard motor while removed from a boat, keep t
Never get und
he
outboard motor in the attitude shown.
CAUTION:
wel or something similar under the outboard motor to protect it from damage. Place a to
38
To Next Page
