16
DECLARATION OF CONFORMITY
EC Declaration of Conformity (Only applies to Europe)
We, Husqvarna AB, SE--561 82 Huskvarna, Sweden, Tel: +46--36--146000, as authorised
representative in the Community, declare that the brushcutter model Partner B 320 B from
serial numbers 2009--031N00001 and onwards (the year is clearly stated on the rating plate,
followed by the serial number), comply with the requirements of the COUNCIL’S
DIRECTIVES:
of 22 June 1998 “relating to machinery” 98/37/EC, annex IIA;
of 15 December 2004 “relating to electromagnetic compatibility” 2004/108/EC, and applicable
supplements; and
of 8 May 2000 “relating to the noise emissions in the environment” in accordance with Annex
Vof2000/14/EC. The measured soundpower is 112,6 dB(A), theguaranteed sound poweris
117,0 dB(A). The cutting width is 43 cm.
The following standards have been applied: EN12100--1:2003, EN 12100--2:2003, EN ISO
11806:1997 and CISPR 12:2005.
SMP, The Swedish Machinery Testing Institute, Fyrisborgsgatan 3 S--754 50 Uppsala,
Sweden, has carried out voluntary type approval. The certificate(s) are numbered:
SEC/08/1231.
09--1--31
Ronnie E. Goldman, Director of Engineering
Handheld Consumer Products
To Next Page
Loading...
