to enter the setting interface. Short press the “MODE”
button to switch the setting items, which are as follows:
wheel size check- speed limit check-single trip distance
reset setting- backlight brightness setting- unit setting
-wheel size check.
In the setting interface, press and hold the “MODE” button
(> 2S) to exit the setting interface.
7.2 wheel size check
In the setting interface, you can check the current wheel
size under the wheel size check option interface.
Wheel size check interface
7.3 Speed limited check
In the setting interface, you can view the maximum riding
speed of the e-bike. When the speed exceeds the set value,
the controller will stop the power supply to the motor to
protect the safety of the rider.
To Next Page
Loading...