Navigation direction
indicator
5. Note for users
When the instrument displays the error code, please go to
the dealer for maintenance.
6. Standard operation
6.1 On/Off
Press and hold the “Switch” button for 2 seconds, the
display will start to work. In the power on state, long press
the “Switch” button for 2 seconds to turn off the e-bike
power. In the shutdown state, the battery power is no
longer used for the display, and the leakage current of the
instrument is less than 1uA.
If the e-bike is not used for a long time, the display will
automatically shut down.
6.2 Speed
After the display is powered on, the display will show the
current speed by default. Short press the “MODE” button
briefly to switch the display information. The sequence of
To Next Page
Loading...