6
Motor Assembly
Step 4
With Motor Assembly tilted up, squeeze 4-5 drops
of oil into Sleeve (Area "A") and 5-6 drops onto lower
lip of Combustion Chamber
(Area "B"). Rotate
Motor Assembly while oiling to ensure oil is evenly
distributed around Sleeve
and lip. See Tool Cutaway
Illustration, page 7.
Step 5
Hold Motor Assembly upright, and push down and
release several times to allow oil on lower lip of
Combustion Chamber to be evenly distributed.
Step 6
Manually push the Driver Blade up and down to
distribute the oil in the Sleeve evenly.
Before reassembly, manually push the driver
back up to the top.
To Next Page
Loading...
