What to do if Paslode 900420 charger gets hot and makes noise?
If the Paslode Nail Gun charger gets hot, makes excessively loud noises, or smokes during the charging cycle, the charger is likely damaged. Discontinue use immediately and unplug it from the power source. Replace the charger and tag or dispose of the old charger to prevent accidental reuse or connection to a power source.
Why Paslode Nail Gun combustion chamber does not drop?
If the combustion chamber on your Paslode Nail Gun doesn't drop after the tool cycles, the work-contacting element may be bent or dirty. Clean or replace the work-contacting element.
Introduces the tool's internal combustion linear motor and its self-contained nature.
Details the limited warranty periods for various parts and overall tool.
Explains the tool's design, including separable handle and motor assemblies.
Lists dimensions, cycle rate, fastener types, magazine capacity, battery, and fuel cell.
Notes potential performance loss at elevations of 4000 feet or greater.
Covers temperature limits, combustible environments, ventilation, and child safety.
Emphasizes reading the manual and using appropriate safety gear.
Details unsafe uses like horseplay, improper trigger use, and operating with defects.
Defines rules for work contact element, pointing, and fastener loading.
Addresses concealed hazards, footing on heights, and qualified personnel.
Covers proper fuel cell and tool storage, and keeping hands clear.
Step-by-step charging instructions, including initial charge and safety notes.
Information on proper recycling and disposal of Ni-Cd batteries.
Lists optional accessories for the battery charging system.
Explains the meaning of the LED indicator light on the tool handle.
Instructions on how to properly insert and remove the tool's battery.
Details the fuel cell's construction, including inner and outer containers.
Explains the metering valve's role in injecting fuel into the combustion chamber.
Notes potential impact of altitude on fuel cell propellant pressure.
Step-by-step guide for attaching the metering valve to the fuel cell.
Provides guidance on proper disposal of used and unused fuel cells.
Instructions for correctly inserting the fuel cell and metering valve into the tool.
Describes Paslode nails, their compatibility, and how to load them.
Explains the purpose of the lockout feature to prevent blank firing.
Details operational guidelines for hot and cold weather conditions.
Describes the nail driving sequence and adjusting nail depth.
Information on optional work-contacting elements and utility hook.
Lists procedures the user can perform, like checking battery and fuel.
Instructions for checking the battery charge and fuel cell levels.
Step-by-step guide to safely remove jammed fasteners from the tool.
Instructions for accessing and cleaning the air filter.
Procedures for after use, including battery charging and cleaning.
Lists various optional accessories for the Paslode nailer.
Identifies essential tools for servicing, like a hex socket wrench.
Addresses issues with battery charging and charger functionality.
Resolves common issues during tool operation, like fan not running.
Addresses further operational issues like fasteners not driving fully or erratically.
Introduces the tool's internal combustion linear motor and its self-contained nature.
Details the limited warranty periods for various parts and overall tool.
Explains the tool's design, including separable handle and motor assemblies.
Lists dimensions, cycle rate, fastener types, magazine capacity, battery, and fuel cell.
Notes potential performance loss at elevations of 4000 feet or greater.
Covers temperature limits, combustible environments, ventilation, and child safety.
Emphasizes reading the manual and using appropriate safety gear.
Details unsafe uses like horseplay, improper trigger use, and operating with defects.
Defines rules for work contact element, pointing, and fastener loading.
Addresses concealed hazards, footing on heights, and qualified personnel.
Covers proper fuel cell and tool storage, and keeping hands clear.
Step-by-step charging instructions, including initial charge and safety notes.
Information on proper recycling and disposal of Ni-Cd batteries.
Lists optional accessories for the battery charging system.
Explains the meaning of the LED indicator light on the tool handle.
Instructions on how to properly insert and remove the tool's battery.
Details the fuel cell's construction, including inner and outer containers.
Explains the metering valve's role in injecting fuel into the combustion chamber.
Notes potential impact of altitude on fuel cell propellant pressure.
Step-by-step guide for attaching the metering valve to the fuel cell.
Provides guidance on proper disposal of used and unused fuel cells.
Instructions for correctly inserting the fuel cell and metering valve into the tool.
Describes Paslode nails, their compatibility, and how to load them.
Explains the purpose of the lockout feature to prevent blank firing.
Details operational guidelines for hot and cold weather conditions.
Describes the nail driving sequence and adjusting nail depth.
Information on optional work-contacting elements and utility hook.
Lists procedures the user can perform, like checking battery and fuel.
Instructions for checking the battery charge and fuel cell levels.
Step-by-step guide to safely remove jammed fasteners from the tool.
Instructions for accessing and cleaning the air filter.
Procedures for after use, including battery charging and cleaning.
Lists various optional accessories for the Paslode nailer.
Identifies essential tools for servicing, like a hex socket wrench.
Addresses issues with battery charging and charger functionality.
Resolves common issues during tool operation, like fan not running.
Addresses further operational issues like fasteners not driving fully or erratically.
To Next Page
General