EasyManua.ls Logo

Paslode IM350+ - Page 16

Paslode IM350+
16 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
The charging system is designed to be used in covered
places. Do not expose it to rain or to excessive humidity.
Arrange the charging system so as not to walk on the
cable or catch it.
Do not use the system with a damaged cable or plug.
Replace them immediately.
To avoid electrocution risks, disconnect the power supply
adapter before cleaning the terminals and contacts. Use a
dry cloth.
The adapter, the charger and the battery are designed to
operate together. Do not use the charging system for other
batteries or battery-operated tools.
Do not put ‘Impulse’ batteries on charge on chargers other
than ‘Impulse’ chargers.
Do not short-circuit a battery. A high current could be
produced causing overheating and destruction of the
battery.
Do not put a battery on charge if its temperature is less
than 5°C or greater than 40°C.
Do not put metal objects in contact with the battery’s
terminals.
Do not pierce or open the battery’s cells.
Do not store batteries at a temperature greater than
50°C.
Do not incinerate batteries.
Do not use a battery charger which heats up excessively
or gives off fumes when connected. Disconnect the charger
immediately.
Only charge one battery at a time on a charger.
Batteries must be recycled or taken to appropriate places
(collection containers according to local provisions).
BATTERY and BATTERY CHARGER:
Before using the battery charging
system, read the instructions and
precautions indicated on the AC/
DC adapter, the charger and the
battery carefully.

Other manuals for Paslode IM350+

Related product manuals