PAT DS 350 - LIMIT Setting; Tip Height Limitation; Boom Angle Limitation; Radius Limitation

Operator's Manual DS 350 / 1361 RT 875 CC
© PAT Revision E // SB // 09/03/02 190137_E
20
5.1 LIMIT Setting
The LMI system has been equipped with programmable limits for the crane's operation
range.
Easy programming due to interactive, step-by-step user guidance
Functions can be used individually or in combinations.
Exceeding a programmed limit triggers an audible and visual alarm.
Overview limits:
Tip Height Limitation
(➭ Section 5.1.1)
Boom Angle Limitation
(➭ Section 5.1.2)
Radius Limitation
(➭ Section 5.1.3)