PAT DS 350 - Radius Limitation

Operator's Manual DS 350 / 1361 RT 875 CC
© PAT Revision E // SB // 09/03/02 190137_E
24
5.1.3 Radius Limitation
Programmable function for the limitation of the minimum and/or maximum working radius.
Call function:
Call LIMIT Setting
Select the corresponding figure to
call the function "radius limitation".
set / delete minimum radius:
Select limits:
select minimum radius limit
set: delete:
position boom at the required
minimum radius value.
set present boom radius as
minimum radius
delete minimum
radius limit
display shows symbol with
radius value of minimum limit
display shows symbol
without value of minimum
radius
quit function