PAT DS150 - Addendum B Reference Tables for Measuring Supply and Signal Voltages for Sensor Channels; Signal Voltage Table; Amplified Signal Voltage Table

Addendums 47
ADDENDUM B Reference Tables for measuring supply and signal voltages
for sensor channels
Use the table as a quick reference for measuring supply and signal voltages for the sensor channels
that are specific to the error code listed.
Signal Voltage
Terminal Board
Terminal X1
Error Code Channel Pin „ground‟ Pin „supply‟
Nominal Voltage
(VDC)
E11/21
E12/22
E13/23
E15/25
E16/26
2 Length 8 11 -5
1 Pressure Piston side 19 20 -5
19 18 +5
0 Pressure Rod side 14 15 -5
14 13 +5
3 Angle Main boom 8 11 -5
4 Angle Jib 23 25 -5
Signal Voltage
Terminal Board
Terminal X1
Error
Code Channel
E11/21 2 Length
E12/22 0 Pressure Piston side
E13/23 1 Pressure Rod side
E15/25 3 Angle Main boom
E16/26 4 Angle Jib
Amplified Signal
on main board
use MP10 - GND
Pin Pin and MP supply
„ground‟ „supply‟ Voltage (VDC) voltage 0.5. ...... V
8 10 -0.5...-4.5 MP13
8 21 0...-1 MP11
8 16 0...-1 MP12
8 9 -1.875...-3.125 MP14
8 24 -1.875...-3.125 MP15