PAT DS350 - DS350 G System Software Replacement

DS350GM - BOOM CONTROL EXTENSION RT 865BXL 8
031-300-190-047 Rev0 02/17/1999
Correct?
Faulty wiring between length
transducer LG 321 and switch
junction box. Check wiring.
Yes
No
Measure the voltage at terminal 1 (+24V) and 5
(GND) in the inner mid junction box.
Refer to section 2, drawing 2.2 and 2.12.
Measure voltage at terminal 1or 2 (+24V) and
5 or 6 (GND) in the switch junction box. Refer to
section 2, drawing 2.2 and 2.12.
Measure the IM reset switch signal at terminal 3
(+24V) and 5 (GND) in the proximity switch junction
box. Refer to section 2, drawing 2.2 and 2.12.
Continue on next
page
Correct?
Yes
Faulty wiring between length
transducer LG 321 and inner
mid junction box. Check wiring.
No
Continuation