Patpet p-collar 310 - Transmitter Button Functions; Dog Selection and Level Adjustment

Step
2
How the Transmitter buttons work
TONE
SHOCK
Up/Down
Button
VIBRA
Dog 1/2 Button
Dog 1/2 Button
10 11
2. Press and hold , Receiver Collar will have a
continuous vibration/shock, and stop after 10 seconds.
Note: Do not suggest to press and hold for long
time to avoid physical or psychological hurt to the dog.
1. Press once to send a vibration, sound,
shock command to Receiver Collar.
1. Press once to switch between Dog 1 and Dog 2.
2. Press and hold until the Vibration digit flashes.
Press “ + - “ to adjust Vibration Level from 1-8.
1/2
3. Press and hold until the Shock digit flashes.
Press “ + - “ to adjust Shock Level from 1-16.
1/2
1/2