Hardware Monitor Page
Lan Card Power
On
Your system can enter a software power down.
If you enable this item, the system can
automatically resume if there is traffic on the
built-in network adapter. You must have an ATX
power supply in order to use this feature.
Ring On Power On
Your system can enter a software power down.
If you enable this item, the system can
automatically resume if there is an incoming call
on the built-in fax/modem. You must have an
ATX power supply in order to use this feature.
RTC Alarm Power
On
Your system can enter a software power down.
If you enable this item, the system can
automatically resume at a fixed time on the
system’s RTC (realtime clock). Use the items
below to set the date and time of the wake-up
alarm. You must have an ATX power supply in
order to use this feature.
PCI / Plug and Play Setup Page
This page sets some of the parameters for devices installed on the
system PCI bus, and devices that use the system plug and play
capability.
Plug and Play
Aware O/S
Enable this item if you are using an O/S that
supports Plug and Play such as Windows 95 or
98.
To Next Page
Loading...
