Chapter 3
Onboard IDE
Use this item to enable or disable either of the
two onboard IDE channels, Primary or
Secondary.
Ultra DMA Support
Use this item to determine if you require Ultra
DMA support for IDE devices on the primary or
secondary IDE channels.
USB Function
Enable this item if you plan to use the USB
ports that are integrated on this mainboard.
USB Function for
DOS
Enable this item if you plan to use the USB
ports that are integrated on this mainboard in
the DOS environment.
CPU PnP Setup Page
This page lets you manually configure the mainboard for the CPU.
The system will automatically detect the kind of CPU that you
have installed and make the appropriate adjustments to the items
on this page.
CPU Speed
Use this item to set the internal clock speed of
your CPU.
CPU Base
Frequency
Use this item to set the system bus frequency
that is required by the CPU.
To Next Page
Loading...
