4
2-3 Features
The meter is a broadband device for monitoring high-frequency radiation
in the range from 10MHz to 8GHz. The non-directional electric field and
high sensitivity also allow measurements of electric field strength in TEM
cells and absorber rooms.
The unit of measurement and the measurement types have been
selected to expressed in units of electrical and magnetic field strength
and power density.
At high frequencies, the power density is of particular significance.
It provides a measure of the power absorbed by a person exposed to the
field. This power level must be kept as low as possible at high
frequencies.
The meter can be set to display the instantaneous value, the maximum
value measured or the average value. Instantaneous and maximum
value measurements are useful for orientation, e.g. when first entering an
exposed area.
10MHz to 8GHz Frequency range.
For isotropic measurements of electromagnetic fields.
Non-directional (isotropic) measurement with three-channel
measurement sensor.
High dynamic range due to three-channel digital results processing.
Configurable alarm threshold and memory function.
Easy & safety to use.
To Next Page
Loading...
Need help?
General
