PCE Instruments PCE-EM 29 - User Manual

ELECTROSMOG METER
INSTRUCTION MANUAL
Z
Y
X
AVGMAX
2

PCE Instruments PCE-EM 29 Specifications

General

Resolution (Electric Field)	1 V/m
Display	LCD
Power supply	9V battery
Resolution (Magnetic Field)	0.01 µT
Sampling rate	2.5 times per second
Frequency range (Electric Field)	5 Hz to 3500 MHz
Measurement range (Magnetic Field)	0.01 µT to 20 µT
Frequency range (Magnetic Field)	50 Hz to 3.5 GHz
Operating conditions	0°C to 50°C, <80% RH

Summary

1. SAFETY INFORMATION

General Safety Precautions

Covers critical cautionary and danger advice for operating the meter safely.

3. SPECIFICATIONS

General Specifications

Details measurement method, resolution, battery life, dimensions, and accessories.

Electrical Specifications

Outlines measurement ranges, dynamic range, accuracy, and frequency response.

4. OPERATION

Front Panel Controls

Identifies and describes the functions of the meter's buttons and sensor.

4-2 LCD Display Description

4-3 Use E-field sensor

4-5 Setting the Meter

Setting Measurement Units

Setting Result Mode

Setting Alarm Limit (ALARM)

Provides a step-by-step process for setting the alarm threshold value.

Setting Calibration Factor (CAL)

Instructions for setting the calibration factor to ensure measurement accuracy.

Alarm Function On;Off

4-6 Making Measurements

Short-Term Measurements

Covers procedures and recommendations for conducting short-term field measurements.

Long-Term Exposure Measurements

Explains how to perform long-term measurements and optimal meter placement.

4-7 Manual Data Memory

Storing Measured Values

Reading Stored Values