PCE Instruments PCE-EM 29 User Manual

5
3. SPECIFICATIONS
3-1 General Specifications
• Measurement method : Digital, triaxial measurement.
• Directional characteristic : Isotropic, triaxial.
• Measurement range selection : One continuous range.
• Display resolution : 0.1mV/m, 0.1µA/m, 0.1µW/m
2
, 0.001µW/cm
2
• Setting time : Typically 1s (0 to 90% of measurement value).
• Display refresh rate : Typically 0.5 seconds
• Display type : Liquid-crystal (LCD), 4 digit.
• Audible alarm : Buzzer.
• Units : mV/m, V/m, µA/m, mA/m, µW/m
2
, mW/m
2
, W/m
2
, µW/cm
2
,
mW/cm
2
• Display value : Instantaneous measured value, maximum value,
average value, or maximum average value.
• Alarm function : Adjustable threshold with ON/OFF.
• Calibration factor CAL : Adjustable.
• Manual data memory and read storage : 99 data sets.
• Dry batteries : 9V NEDA 1604/1604A (Alkaline battery)
• Battery life : > 3 hours
• Auto power off : 5 minutes.
• Operating temperature range : 0℃ to +50℃
• Operating humidity range : 25% to 75%RH
• Storage temperature range : -10℃ to +60℃
• Storage humidity range : 0% to 80%RH
• Dimensions : Approx. 67(W)×60(T)×247(L)mm.
• Weight (including battery) : Approx. 250g
• Accessories : Instruction manual, battery, Carrying case.

PCE Instruments PCE-EM 29 Specifications

General

Brand	PCE Instruments
Model	PCE-EM 29
Category	Measuring Instruments
Language	English