Manual
17
6.8 PC software installation
The installation of PCE-FWS 20 software is very simple: double click the setup.exe file and follow the
steps popped up.
Make sure you are running the program under the administrator accounts of your windows PC platform.
Otherwise the graphic function might not be working when graph display mode is needed to display all
history data.
If you run the program for the first time, the current weather display will be displayed and at the sub line of
the window, the program will show related information regarding the read of all history data into the PC.
Please note however, when there is large amount of data is being uploaded, it will take a few minutes
time before the system can respond to your setup settings. Otherwise it will display “read weather data
fail” error message since the USB port is reading the data from the memory and the system is not able to
respond any further job tasks.
To Next Page
Loading...
Need help?
General
