PCE Instruments PCE-P18 - Page 29

29
2 Dew-point
3 Absolute humidity
4 Wet bulb tempera-
ture
4016 Value
controlling
2 analog
output.
w/
r
0...3 Va-
lue
Description
0 Temperature
1 Relative humidity
2 Dew-point
3 Absolute humidity
4 Wet bulb tempera-
ture
4017 Status
w/
r
-32768
...32767
Transducer status. Shows
the current state of the trans-
ducer and the hardware con-
figuration. Successive bits
represent the event. Bit set
to 1 indicates that the event
took place.
Bit15 Restart of the supp-
ly, writing the value
-32768 (8000h) will
clear the status bit
Bit14 Error of the calibra-
tion parameters
Bit13 Error of the transmit-
ter settings - enter the
new settings