5
1. APPLICATION
Fig. 1. Overview of the P18 and P18D transducers with the probe
on the housing.
The PCE-P18 transducers are the devices destined for
the continuous measurement and conversion of relative
humidity and ambient temperature into a digital form and
into a voltage or cur-rent standard signal. The
transducers are fixed on a wall. Programming of the
transmitters is possible via the RS?-485 interface. LPCon
or eCon software designed for configuration of the
transducers is available on the manufacturer’s website:
www.pce-instruments.com. Applied sensor shields
enable the application of the transducers in various
ambient conditions.
To Next Page
Loading...