Brought to you by PCS Electronics, www.pcs-electronics.com
WINDOWS CONTROL PROGRAM – CyberMaxAmp+ v4.1
SOFTWARE INSTALLATION AND COMMUNICATION SETUP
Software installation and setting up connection via serial COM port or USB port are described in Appendix I.
COM PORT SETUP
Select correct COM port here.
Fig. 15: COM port setup.
The selected COM port must match the COM port detected under Device Manager. To open device manager, enter
“Device Manager” into search box in Windows, than click Device Manager:
Fig. 16: COM port in device manager must match the one in CyberMaxAmp program.
To Next Page
Loading...