Brought to you by PCS Electronics, www.pcs-electronics.com
Troubleshooting
We hope you’ll never get to this step. We all know bad things happen but do not despair! MAX PRO 6000+ series exciters
are protected with a fuse, SWR and TEMP protection. Fuse is the first thing to check. Make sure your coaxial cable leading
to the transmitter or antenna is not shorted or open. Next check the troubleshooting table on the next page. If you have
problems you cannot solve yourself, please see our website for contact information and support resources in our forum.
Fig 18: So, do you think you can handle it? We think you sure can!
To Next Page
Loading...