Brought to you by PCS Electronics, www.pcs-electronics.com
Appendix A – IO board and PC remote control
Software installation
Download the latest CyberMaxAmp+ setup file from our website. Software and manual are available in our forum.
Once you have the setup file run it and install the program on your computer. This process is very straight-forward and
should only take a few minutes. Wait for the installation to complete and click Finish when done. Follow instructions on the
Fig. 19: Setup is about to start
Fig. 20: CyberMaxAMP+ remote control software
As you can see this program lets you control all the parameters of your FM transmitter including RDS parameters. It also lets
you read all of the available information, such as output power, temperature, frequency, uptime etc. (you cannot read the
RDS data, we are working on adding this functionality at some time in the future).
To Next Page
Loading...