Brought to you by PCS Electronics, www.pcs-electronics.com
Reference Function
1 Mains power, universal input 110-240V, IEC jack (same as for PC)
2 Fuse and main mains switch (total off)
3 Ventilation aperture
4 Antenna connector, N female or 7/16. Do not operate without antenna.
5 BNC connectors for MPXin, MPXout and 19KHz pilot. Only when used as FM transmitter.
6 RS232/USB for remote control.
7 Audio inputs, RCA jacks for left and right channel. Only when used as FM transmitter.
8 STEREO mode indicator. Only when used as FM transmitter.
9, 10 Balanced audio inputs, left and right channel XLR (Canon). Only when used as FM transmitter.
11 Ethernet (optional) port for remote control.
12 Not shown. There is also N female RF input connector.
Table 2: Back panel for 2H model
To Next Page
Loading...