Active store function: store the measureing data to memory
Active read function,to view the data store in memory; change cursor position.
1 ： in dcv ,acv,continuty mode to view the max value,min value ,avg value, upper limited value,
lower limited value,relative value
2：in insulation mode to view max value,min value ,avg value, upper limited value, lower limited
value,preset timer,DAR,PI
Back Light on/Off,when the light turn on ,after 10s the meter auto turn off light
Active the timer function
Active hold function(in DCV,ACV,Continuity) or lock function(Insulation)
Active rel function(in dcv,acv,continuity mode);change cursour position ;
Select one test output voltage for insulation test.
To Next Page
Loading...
