6.5. Viewing Graph Data
To view the graph data that was stored into memory of the meter,
proceed as described:
Press the "F3" key (SAVE) button to enter the system menu
Select the menu item VIEWG with the key "F3" (DOWN)
Press the "F1" (ENTER) to view the stored measurement values.
Press push button “F2” (PREV) or “F3” (NEXT) to scroll through
the stored data
Press the "F1" key (ENTER) the stored value can be viewed
more detail.
Press the "F2" or "F3" keys on the course of the saved diagram
can be viewed and displayed the individual measured values.
-100-
To Next Page
Loading...
