PeakTech 3440 User Manual

8. Bluetooth
You can use the Bluetooth communication link and transfer the
contents of a meter’s memory to a PC.
Open the setup menu.
Open the Save-menu by pressing the push button "F3" (SAVE).
Press the push button "F3" (DOWN) the menu item "SETUP" and
then "BLUETOOTH" and press the push button “F1" (ENTER).
The LCD screen will be prompted:
"Turn on Bluetooth?" - Press the push button "F1" (OK) to activate
the Bluetooth interface.
To turn off the Bluetooth interface again proceed as follows:
Open the Devices menu by pressing the push button "F3" (SAVE).
Press the push button "F3" (DOWN) the menu item "SETUP" and
then "BLUETOOTH" and press the push button "F1" (ENTER).
The LCD screen will be prompted:
"Turn off Bluetooth?" - Press the push button "F1" key (OK) to
disable the Bluetooth interface.
-109-

PeakTech 3440 Specifications

General

Brand	PeakTech
Model	3440
Category	Multimeter
Language	English