6. Performing Measurement
General:
1. Temperature measurement:
The display shows the air temperature in °C/°F.
2. Humidity measurement:
The display shows the relative humidity in %RH.
Humidity refers to the amount of water vapor at room or
ambient air.
3. To "freeze" the current reading press the "HOLD" - button.
The display stops updating the measured values and the
"HOLD" - symbol appears.
Automatic Power Off:
If the device is no longer used, it will automatically turn off after 10
minutes.
Backlight:
This unit features an automatic backlight, which activates the
backlight when the light sensor on the front panel detects low light
conditions.
-15-
To Next Page
Loading...
