* Keep hot soldering irons or guns away from the
equipment.
* Allow the equipment to stabilize at room temperature
before taking up measurement (important for exact
measurements).
* Use caution when working with voltages above 35V
DC or 25V AC. These Voltages pose shock hazard.
* Fetch out the battery when the meter will not be
used for long period.
* Periodically wipe the cabinet with a damp cloth and
mid detergent. Do not use abrasives or solvents.
* The meter is suitable for indoor use only
* Unplug before cleaning
* The power meter shall be used only in area with
installation category II (CAT II) according to
IEC664, in which the transient voltages do
not exceed 300V. The mains supply for residential
areas generally belongs to this category.
* Do not store the meter in a place of explosive,
inflammable substances.
* Do not modify the equipment in any way
* Opening the equipment and service – and repair
work must only be performed by qualified service
personnel
* Do not operate the meter, if the environmental
conditions don´t correspond to the technical
specifications (>75%RH, >40°C or <10°C)
* Measuring instruments don’t belong to children
hands.
-24-
To Next Page
Loading...
Need help?
General
