1. Safety Precautions
This product complies with the requirements of the
following European Community Directives: 2004/108/EG
(Electromagnetic Compatibility) and 2006/95/EG (Low
Voltage) as amended by 2004/22/EG (CE-Marking).
To ensure safe operation of the equipment and eliminate
the danger of serious injury due to short-circuits (arcing),
the following safety precautions must be observed.
Damages resulting from failure to observe these safety
precautions are exempt from any legal claims whatever.
* Do not use this instrument for high-energy industrial
installation measurement.
* Prior connection of the equipment to the mains,
check that the available mains voltage corresponds
to the voltage setting of the equipment.
* Connect this instrument only to main outlet with
protection earth contact (PE).
* Do not operate the meter before the cabinet has
been closed and screwed safely as terminal can
carry voltage.
* To avoid electric shock, do not operate this product
in wet or damp conditions. Conduct measuring
works only in dry clothing and rubber shoes, i. e. on
isolating mats.
* Comply with the warning labels and other info on the
equipment.
* Do not subject the equipment to direct sunlight or
extreme temperatures, humidity or dampness.
* Do not subject the equipment to shocks or strong
vibrations.
* Do not operate the equipment near strong magnetic
fields (motors, transformers etc.).
-23-
To Next Page
Loading...
