Need help?Do you have a question about the Peavey 2.6 C and is the answer not in the manual?
General| Type | Stereo Power Amplifier |
|---|---|
| Channels | 2 |
| Inputs | XLR, 1/4" TRS |
| Power Output | 260 Watts |
| Power (per channel) | 130W |
| Power (bridged) | 260W |
| Input Impedance | 20k ohms |
| Frequency Response | 20 Hz to 20 kHz |
| Outputs | Binding Posts |
Protects the amplifier from overcurrent and fault conditions.
Turns the amplifier on and features automatic thermal protection.
Prevents clipping distortion; should be enabled to protect speakers.
Illustrates how to connect inputs and outputs for stereo mode.
Illustrates how to connect inputs and outputs for mono mode.
Covers usage, placement, cord handling, and cleaning safety.
To Next Page
