8
IInnppuutt CCoonnnneeccttiioonnss
The Euro-style connectors are wired as: Pin 1 is positive; Pin 2 is negative; and Pin 3 is chassis ground.
Normally balanced inputs are wired using two-conductor shielded cable as shown in the following
diagram. For un-balanced (single-ended) inputs‚ the single conductor is wired to Pin 1; and the shield
is connected to Pins 2 & 3 as shown in the following diagram.
DDIIPP SSwwiittcchh SSeettttiinnggss
IInnppuuttss
IInnppuutt MMoodduulleess
To Next Page
Loading...
