Peavey Invective MH

Invective MH
®
All-Tube Guitar Amplier SPECIFICATIONS
Rated Power: 20 W(rms) into 8 or 16Ω
Power Consumption: (Domestic) 90
W, 50/60 Hz, 120 VAC
Tube Complement: 2 x EL84, 3 x
12AX7/ECC83
Dimensions (H x W x D): 7.25" x
14.00" x 7.75" / 185mm x 356mm x
197mm (height includes feet and handle)
Weight:17 lbs / 8kg
Preamp Specications
Preamp Input:
Impedance: Very High-Z, 1MΩ
E󰀨ects Send:
Low Impedance: To High-Z, 22kΩ
or greater
Nominal Output Level: 0 dBV, 1.0
V(rms)
E󰀨ects Return:
Impedance: High-Z, 100kΩ
Designed Input Level: 0 dBV, 1.0
V(rms)
Remote Footswitch(s): (included)
Special 2-button unit with LED
indicators (#00579720)
One footswitch for channel selection
and tight functions.
A second footswitch can be used for
turning Boost + Gate and/or e󰀨ects
loop on and o󰀨.
Other Misc Specications
Signal to Noise Ratio:
Better than 74dB on all models
(compared to full power and dependent
on preamp settings)
MSDI Output:
Low Impedance: 600Ω - Quasi-
Balanced
Output Level: Dependent on
controls but -12dBu (+/-3dBu) at full
power on all models
USB Output:
Output Level: Dependent on
controls but -6dB (+/-3dB) at full power
on all models
Power attenuator:
Three setting switch for 100%, 25%
and 5% of rated power. (20W, 5W and
1W respectively.)
Headphone Output:
Stereo mini-jack with ltered output
for driving stereo headphones, 16Ω -
50Ω impedance per side.
*Features and specications
subject to change without notice.