Introduction
ank you for purchasing the powered Peavey® PVX™p 10 Bluetooth® speaker system. e PVX™p 10 Blue-
tooth® features an reliable bi-amped power section that provides a total of 520 Watts of peak dynamic power
with DSP based compression and limiting. Featuring a 10” heavy-duty woofer with a 2 3/8 inch voice coil
and 50 ounce magnet, and the RX™10 compression driver with a 1 inch titanium diaphragm on a 100 degree
horizontal x 60 degree vertical pattern asymmetrical horn. e PVX™p 10 Bluetooth® provides two channels
with a balanced input via a combination jack that accepts balanced TRS 1/4 inch input as well as a balanced
XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a
Bluetooth® source, or alternatively a 1/8” AUX input jack. Each channel has an adjustable Level control, and a
three-band EQ section. ere is a balanced output, a Male XLR, that can feed the mixed signals from the three
channels out to another component. A front bae LED indicator that can be set to light when power is on, and
when the “so-limiting” DDT circuit is activated, or turned o altogether. e LCD display and EQ presets,
along with other DSP operating parameters are accessed via a one-knob selector.
Features
* Two-way bi-amped sound reinforcement enclosure
* 10” heavy-duty woofer with 2 3/8” voice coil & 50 oz. magnet
* RX™10 compression driver, with 1 inch titanium diaphragm
* Reliable fan-cooled power amps with DSP protection
* Total of 520W peak dynamic power
* DSP control for precise crossover, EQ and limiting functions
* DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-precision
* Peavey’s Quadratic roat Waveguide™ technology, 100 by 60 degree coverage
* Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads
* Bluetooth® input is via a dedicated input channel
* Analog input is via a combo female XLR and 1/4” TRS phone jack with balanced input
* ree channels in total, two for analog, and one for Bluetooth or AUX input via a 1/8” jack
* Each channel has a level control and a 3-band EQ section to adjust and shape the input signals
* Mix/ru Output is via a male XLR jack
* Durable plastic injection-molded trapezoidal enclosure
* Extra angled section on right side allows oor monitor use
* Full-coverage heavy-duty perforated steel grilles, with powder coat nish
* Pole mount molded-in for 1 3/8” diameter poles
* Top and bottom ying point inserts
Description
e PVX™p 10 Bluetooth® is a two-way sound reinforcement system based on a heavy-duty Pro 10 10” woofer
and a RX™10 titanium diaphragm dynamic compression driver mounted on a 100 by 60 degree coverage Qua-
dratic roat Waveguide™. It’s sleek, modern appearance coupled with excellent performance, oer a superb
overall package.
e lightweight yet rugged injection-molded plastic enclosure with molded-in stand mount cup facilitates
portable use for live music or PA sound. e trapezoidal cabinet has two handles for ease of portability, and an
extra 45-degree angled section on the right side to allow use as a oor monitor. Four sets of ying/mounting
ENGLISH
To Next Page
Loading...
Need help?
General
