5
Introduction
We are pleased to have you as a PECO customer. Your
collection system has been designed to give you a low
maintenance, simple, and effective way to collect the
grass clippings from your mower. This manual is
provided to give you the necessary instructions to
properly mount, operate and maintain the collection
system on your mower. Please read this manual
thoroughly. Understand what each control is for and how
to use it. Observe all safety decal precautions on the
machine and noted throughout the manual.
NOTE: All references made to right, left, front, rear, top
or bottom are as viewed from the normal operator’s
position on the mower.
Description
The grass collection system is designed for turf
maintenance where there is a need to collect the grass
clippings as the mower cuts the turf. It is also used for
picking up leaves in pre-season and post-season clean-
up. The blower/blade assembly, is mounted on the right
side of the unit. The blower draws grass clippings from
the discharge area of the cutter deck back and up to the
collection bags mounted to a three-point hitch at the
rear of the mower. The operator can engage the
blower/blade assembly by engaging the mower’s rear
PTO. Once the bags are full of clippings, they can be
easily released for dumping.
Section I - INTRODUCTION AND DESCRIPTION
To Next Page
Loading...
