EasyManua.ls Logo

Pecron E3000 - Frequently Asked Questions; Device Usage and Performance; Maintenance, Storage, and MPPT

Pecron E3000
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FAQS
support@pecron.com
Q1: What kind of battery is used in E3000? How long it can last?
A: E3000 utilizes high quality UL certified automotive battery cell, it can retain 80% efficiency after 1000 complete
charge cycles.
Q2: What devices can E3000 power?
A: E3000 can power most devices with power consumption less than 2000 watts.
Q3: Can the E3000 be used as UPS?
A: The UPS function is not supported.
Q4: Can the E3000 be charged while discharging?
A: Yes, E3000 can run devices while it is being charged. The battery will eventually run out if the discharging is
greater than the charging during the pass through charging.
Q5: How to calculate the E3000 running time?
A: Running Time=Total Capacity(3108Wh) * 0.85 (Depth of Discharge)/Loading Power(Watts)
Q6: Can I use the E3000 indoors and charge the E3000 indoors?
A: Yes, the E3000 is safe to use indoors.
Q7: Does E3000 have built-in MPPT controller?
A: Yes, there are two independent 600W(PV 32V~95V) MPPT charge controllers inside, and one step up 100W
(PV 18V) MPPT charge controller, The Voc ( Open Circuit Voltage) of the solar panels should not exceed 95V.
Q8: What kind of maintenance does E3000 require?
A: Charging E3000 in time when the battery running low; And please charge it at least once for every six months
even if it is not being used.
Q9: How to store the E3000?
A: Do not store, charge or use E3000 near heat sources, or in an area exposed to flammable or corrosive gas;
Do not immerse in water. Keep away from liquids and store it in a cool and dry place.

Related product manuals