Pg. 14 Pg. 15
Pedal Assist Mode
Your Pedego is equipped with an LCD meter that monitors pedal assist, speed,
odometer, trip distance, riding time, and battery energy level. To turn the meter on,
make sure the battery is fully inserted into the Pedego and the on/off switch is in
located near the left grip on the handlebars to turn the meter on. You can adjust the
pedal assist power level to have more power by hitting the [+] button (third button)
and can move to a lower level power by hitting the [-] button (fourth button). If you
set the pedal assist power level to “0”, then the pedal assist function of the bike is
riding your Pedego, you will notice that when the pedal assist function is activated,
the motor will supply power when you turn the pedals forward. In pedal assist level
1, you will get assistance at around 40% of the maximum power from the motor. In
level 5, you will get 100% assistance from the motor. Experiment with the different
levels of pedal assist to become familiar with how much power you want. You will
need different levels of assist for different riding conditions. When not riding the
bike, you can turn off the meter by holding down the power button (top button) for
several seconds.
Trip Distance / Riding Time / Odometer
Speedometer
Pedal Assist
3
3
3
For Boomerang Plus, City Commuter, Interceptor, & Trail Tracker
Battery Indicator
(V)
3
To Next Page
Loading...
Need help?
General
