Need help?Do you have a question about the Peerless Pump AEF and is the answer not in the manual?
Instructions for safely unpacking the pump and verifying its components.
Procedures for inspecting the product for transport damage and order accuracy.
Guidance on safe handling and transport of the pump unit.
Lists the typical items included in a shipment of the pump.
Recommends factory support for engineered-to-order products and reviewing provided instructions.
Specifies requirements for selecting an appropriate installation location for the pump.
Covers foundation requirements, grout, and anchor bolt installation for pumps.
Details essential preparations for engine and system installation.
Covers pipe and connection requirements, including inlet and outlet pipes.
Provides instructions and safety warnings for electrical connections.
Advises checking control and alarm systems for proper installation and function.
Lists items to check before startup, including lubrication of pump and driver.
Steps for verifying correct motor rotation direction before coupling.
Emphasizes the importance of safety guards during operation.
Recommends cleaning the system to remove debris before pump installation.
Outlines steps for decontaminating the system if necessary.
Explains the process of priming the pump to ensure it is filled with liquid.
Details the initial setup and operation of the stuffing box gland.
Provides a step-by-step guide for starting the pump and verifying its performance.
Guidelines for storing the pump for short periods to maintain its condition.
Safety precautions for handling the product during storage and movement.
Describes the Peerless AEF pumps as horizontal split case fire pumps.
States that the AEF model is intended for fire protection systems.
Explains how to identify the pump using its nameplate and type key.
General warnings and overview of maintenance requirements.
Provides a schedule for routine inspections and maintenance tasks.
Step-by-step instructions for safely dismantling the pump.
Explains the function and importance of wear rings in pump performance.
Details the procedure for replacing worn wear rings.
Specifies acceptable diametrical clearances for pump components.
Guidelines for inspecting parts for damage before assembly or installation.
Procedures for repairing damaged pump components.
Step-by-step instructions for reassembling the pump after servicing.
Provides a parts list and diagram for the AEF model.
Lists parts and shows a diagram for the AEF model with double row thrust bearing.
Lists parts and shows a diagram for the 12AEF21 model.
General| Brand | Peerless Pump |
|---|---|
| Model | AEF |
| Category | Water Pump |
| Language | English |
To Next Page
