Need help?Do you have a question about the Peerless Pump ELS and is the answer not in the manual?
Verify well casing diameter, depth, and straightness for pump compatibility.
Steps to clear the well of sand and debris for optimal pump operation.
Instructions for constructing a stable foundation for pump installation.
Safe procedures for lifting and handling pump components during delivery and unpacking.
Inspecting and preparing shaft and tube sections for straightness and cleanliness.
Method for carefully lifting and lowering the bowl assembly into the well or sump.
Step-by-step guide for assembling the main pump shaft, tube, and column sections.
Mounting the discharge head and precisely leveling the pump assembly.
Securing the foundation with grout and tensioning the enclosing tube nut.
Installing the motor and setting up the lubrication system.
Pre-start checks and procedures for safely initiating pump operation.
Guidelines for long-term storage and details of the manufacturer's warranty.
General| Model | ELS |
|---|---|
| Impeller | Enclosed, dynamically balanced |
| Type | End Suction |
| Construction | Cast Iron |
| Shaft Seal | Mechanical Seal |
| Rotation | Clockwise |
| Standards | ANSI standards |
To Next Page
