28
7. To store the rigid LATCH
connectors inside the
booster seat, squeeze the
yellow handle and at the
same time push the yellow
rigid LATCH connectors
into the booster until they
disappear.
IMPORTANT: Make sure the booster does not sit
on top of the seat belt hardware or webbing for its
seat or a neighboring seat. If the booster sits on top of
the hardware or webbing, stop using the rigid LATCH
and reposition the booster seat. If it still sits on top
of the hardware or webbing, move the booster to a
dierent seating position. If you need further help,
check your vehicle owner’s manual and/or contact
Peg-Perego Customer Service at 1-800-671-1701.
1
2
HIGHBACK MODE:
SECURING THIS BOOSTER WITH RIGID LATCH
To Next Page
Loading...
